|How the glass sides fit|
|First thread the spring onto the leg of the main frame|
|Clip goes under main frame and hooks over side glass.|
|The clip goes BEHIND the main frame bar|
|Place first roof glass in hooks of clip|
|Lift the spring to the top of the frame|
|Adding second roof glass|
|True up ends of glass|
|Gap for ventilation|
|The fully assembled cloche|
Finally a safety warning. Be careful handling glass, wear gloves (I know I didn't) glass can shatter unexpectedly, especially old glass that has been stressed by multiple uses. If you are cutting new glass for cloches then take the time to smooth all the edges with emery cloth or similar. It takes time, but it saves so many cut fingers. Cut glass stays sharp for years and you will hopefully be using these cloches for years.
Well I hope that the above proves useful.